Aerocool Project 7 3 x P7 F12 120mm RGB Fans P7-H1 RGB PWM Fan Hub Pack

Central Stock - 3 working days
Central Stock - 3 working days
ACF3-P710227.01
by AEROCOOL
£36.99
The Project 7 Hub1 (P7-H1) uses software to simultaneously control up to five fans (4-pin or 3-pin) and synchronize all Aerocool RGB products and other RGB 4-pin compatible products. It is also compatible with RGB motherboards including ASUS, MSI and Gigabyte to name a few. The hub additionally supports LED outputs of up to 24 Watts.

The P7-F12 blade fins direct airflow to increase air pressure for maximum cooling performance, have reduced air resistance and generate minimal noise thanks to the anti-vibration pads that absorb and dampen vibrations caused by fan rotation in the PC. The fan blades are removable with just a push for easier access to clear dust build up or to individually clean each fan without opening your entire front panel on the PC.

The P7-H1 software is compatible with Windows 7 and newer versions. There are multiple ways to install the hub inside the case using either a Velcro strap, screws or zip ties.

Up to eight individual hubs (P7-H1) can be connected and identified with the built-in switch board through a single motherboard.

Key Features
- The fans are compatible with RGB MBs: Access 16.8 million colours with RGB 4-pin using P7-H1 RGB Fan Hub or other compatible motherboards including Asus Aura, MSI’s Mystic Light Sync and Gigabyte RGB Fusion
- Fans maximise performance and generate minimal noise: Fan blade fins direct airflow to increase air pressure for maximum cooling performance and reduce air resistance and minimise noise
- Anti-vibration pads: Anti-Vibration pads absorb and dampen vibrations caused by fan rotation
- Removable fan blades: Removable fan blades for easier access to clear dust build up
- Hub syncs RGB products: Synchronise all Aerocool RGB products and other RGB 4-pin compatible products
- Hub outputs up to 24W: Both LED outputs collectively support up to 24 Watts
- Hub controls up to five fans: Controls up to five fans compatible with both 4-pin and 3-pin connectors
- 8 hubs connect to a MB: Up to eight individual hubs (P7-H1) can be connected and identified with the built-in switch board through a single motherboard
- Hub works with Win 7 and newer: The P7-H1 RGB Fan Hub software is compatible with Window 7 and newer versions
- Ways to install the hub: Multiple ways to install the hub inside the case using Velcro strap, screws or zip ties

Hub Main Function
PWM Fan Speed Control

Hub Connector
9-Pin USB 2.0

Hub LED Output
2 Connectors (Expandable)

Hub LED Wattage
Up to 24 Watts

Hub Fan Output Port
5 Ports

Hub Fan Output Wattage
Up to 18 Watts

Hub System Compatibility
Windows 7 and Newer Versions

Hub Software Enabled
LED Light Control

Fan Dimension ( W x H x D )
120 x 120 x 25 mm

Fan Speed
1200RPM

Fan Starting Voltage
9V

Fan Rated Voltage
12V

Fan Rated Current
0.15 A

Fan Air Pressure
1.01 mmH2O

Fan Air Flow
45.8 CFM

Fan Noise Level
14.5 dBA

Fan Bearing Type
Hydraulic Bearing

Fan MTBF
60000 hrs

What's In The Box
Fan
Manual
4 x Screws
4 x Zip ties
1 x Velcro strap

Unit Dimensions ( W x H x D )
130 x 190 x 85 mm

Packaging Dimensions ( W x H x D )
130 x 190 x 85 mm

Weight
Net: 0.5 KGs
Gross: 0.65 KGs